High Speed Air Chipping Hammer 3000 BPM Digger LE-CR001 | OEM / ODM Pneumatic Chipping Tool Supplier
A 3,000 BPM pneumatic chipping hammer for rust, scale, slag, and industrial surface removal.
High Speed Air Chipping Hammer 3000 BPM Digger LE-CR001 | OEM / ODM Pneumatic Chipping Tool Supplier
The LEMATEC LE-CR001 is a professional air chipping hammer for industrial rust removal, scale chipping, weld slag cleaning, foundry work, construction chipping, and hard-surface preparation where controlled high-frequency impact is required.
An air chipping hammer is a pneumatic impact tool that uses compressed air to drive repeated hammer blows through a chisel. It is used when scraping, brushing, or grinding is too slow for hard rust, scale, slag, and concrete residue.
Choose the LE-CR001 when buyers need 3,000 BPM impact speed, 90 PSI operation, controlled hand-held chipping, and a professional pneumatic tool for industrial maintenance, fabrication, foundry, construction, or automotive repair channels.
3,000 BPM supports fast repetitive impact for rust removal, scale chipping, weld slag cleaning, and hard surface preparation tasks that require more force than manual scraping.
Buyers can quickly confirm 90 PSI pressure, 400 l/min air consumption, 66 mm stroke, 20 mm bore, 3/8" hose, and 2.81 kg weight before deciding on sample or bulk inquiry.
The tool fits foundry cleanup, shipbuilding maintenance, automotive bodywork, construction chipping, steel structure preparation, and MRO tasks where pneumatic impact tools are standard.
The LE-CR001 can be positioned as a professional air chipping hammer for industrial users who need a simple, high-impact pneumatic tool with clear specs and OEM/ODM supply support.
OEM / ODM and Wholesale Supply Support
LEMATEC supports distributors, importers, industrial tool brands, and private-label buyers seeking pneumatic chipping tools with technical documents, sample validation, packaging discussion, product imagery, and OEM/ODM project support.
Confirm 90 PSI operating pressure, 3/8" hose size, 400 l/min air capacity, and the correct chisel type for rust, slag, scale, or concrete residue.
Keep the chisel seated against the material and use controlled passes. Avoid forcing the tool at an unstable angle that can reduce chipping efficiency.
After chipping, inspect the surface, remove loose debris, disconnect air, and follow pneumatic tool lubrication practices to protect internal components.
| Use case | Recommended setup | Why it matters | Buyer check |
|---|---|---|---|
| Rust and scale removal | Flat or scaling chisel with stable 90 PSI air supply | High-frequency impact removes hard deposits faster than manual scraping. | Confirm surface hardness, chisel type, and compressor capacity. |
| Weld slag cleaning | Pointed or flat chisel depending on weld shape | Controlled impact helps clean welded joints before inspection or finishing. | Check chisel access, operator visibility, and material thickness. |
| Foundry and casting cleanup | Chipping hammer with suitable accessory for casting residue | Helps remove sand, gates, sprues, and hard residue from castings. | Confirm accessory fit, tool weight, and duty cycle expectations. |
| Construction chipping | Concrete or masonry chisel with sufficient air volume | Supports surface concrete, mortar, adhesive, and hard residue removal. | Confirm application severity and whether a larger breaker is required. |
| Model Number | LE-CR001 |
|---|---|
| Type | Air chipping hammer |
| B.P.M. | 3,000 |
| Weight | 2.81 kg / 6.2 lbs |
| Operating Pressure | 90 PSI |
| Stroke Length | 66 mm |
| Bore Diameter | 20 mm |
| Air Inlet | 1/4" |
| Air Consumption | 400 l/min |
| Overall Length | 270 mm |
| Hose Size | 3/8" |
| Origin | Made in Taiwan |
The official category page places it under Air Drill, but the product itself is an air chipping hammer. Its function is impact chipping, not rotary drilling.
Buyers should confirm sustained 90 PSI output and enough volume for 400 l/min air consumption. A 3/8" hose is listed in the source specifications.
It suits rust removal, scale removal, weld slag cleaning, foundry casting cleanup, masonry residue removal, and industrial surface preparation.
Yes. LEMATEC can discuss OEM/ODM, private-label packaging, sample validation, technical details, product imagery, and wholesale quote support.
Get the right High speed air chipping hammer 3000 bpm digger setup
For distributor, importer, OEM/ODM, or private-label inquiry, send LEMATEC your application, quantity, market, required specs, chisel/accessory needs, packaging direction, and target delivery date. Our team can help confirm the right model fit, accessory match, sample path, and quote guidance.
- Application: rust removal, weld slag cleaning, casting cleanup, construction chipping, or industrial MRO
- Quantity and market: distributor, importer, private-label brand, or industrial tool channel
- Required specs: BPM, bore diameter, stroke length, air consumption, hose size, and chisel requirements
- Output: model recommendation, accessory match, sample guidance, and wholesale quote support